Wisdom in mind,   enthusiasm at heart.

Home Products Warranty Shop Contact Us Shipment Chinese

DI-V2    (Without DSP-3.1)
DI-DSP(Built in DSP-3.1)
USB / Coaxial converter
Supports full speed Asynchronous Transfer Mode
Built in the Tenor TE8802 chip

Price:        DI-V2-S       USD108 ( USB input only )
                  DI-V2          USD128 ( USB & coaxial inputs)
                 DI-DSP-S    USD168 ( USB input only )
                 DI-DSP       USD198  ( USB & coaxial inputs)

Summarize Use Manual Specs Technology Detail Custom Option Shipping Cost

Please note :
1, If Connect to Win 7, start the Win 7 then power on the DI.
2, In power supply by computer model, make sure the USB cable connect well with the USB port.
  If use extern power supply for the DI, Exchange the power supply of DI,  please push the switch of DI to "OFF" , after waiting least 10 seconds then push to another power supply . 

Exchange the output sockets based on users request:     
          In default the BNC output applied  Current Conveyor Technology ,  the RCA output  applied transmit insulate technology, If user want to applied applied Current Conveyor technology through RCA output , or applied transmit insulate technology through BNC output, just exchange the wires connect in the DI without soldering. While exchange the wires must be care don't break the wires .       
Hardware functions  setting:     

For the old version PSU modify to power supply new DI-DSP ( The DI-V2 can power supply by old version PSU without modify) (The addition resistors are the 3 ohm // 5.1 ohm )




版权所有:          何庆华  睿志音响

Copyright(C) 2004   www.audio-gd.com    All Rights Reserved