Wisdom in mind,   enthusiasm at heart.

Home Products Warranty Shop Contact Us Shipment Chinese
 

DI-2014 (Release since 1st Aug)
USB / Coaxial / Optical to  I2S / Coaxial  converter
Full / High Speed Asynchronous Transfer Mode
Built in USB-32 DSD
perform ultra low jitter
Coaxial Input / Output up to 24bit / 192KHz support
I2S output up to 32 bit  / 384K 
and DSD/DXD  support

          

       

Summarize

Use Manual

Specs

Technology Detail

Custom Option

Shipping Cost

Please note :
        The DI-2014 had built in massive class A PSUs for the best power supply, it will have got heat but it is much safe for its life. We are advice don't cover anythings on it top side, and don't put it on the high heat source .
        Because the DI-2014 had not connect the +5V from the computer for less disturb, so user must start the Windows or computer  then power on the DI.
        For the best connect, the clock had solder before shipping .
       The DI-2014 had exact adjust inside, don't change any setting inside.
       Replace the clock MUST power off the unit and pull off the power cable.
@

What is DSD CTR:
If you own the Audio-gd DSD support DAC and want to transmit DSD through DI-2014  I2S (RJ45 or HDMI) , you can connect the RJ45 or HDMI cable and the DSD CTR cable between them.
If you only want to play PCM , the DSD CTR can with/ without connect betweem them.

Power earth switch:
 The switch on rear for ON / OFF the power earth wire. Users must put it on.  But can try turn off to test if can improve on sound quality.


Click to review : RJ45 and HDMI pin definitions
@


备֕号:粤ICP备05020367号

H权┮V:          z庆华  Mв响

Copyright(C) 2004   www.audio-gd.com    All Rights Reserved