Wisdom in mind,   enthusiasm at heart.

Home Products Warranty Shop Contact Us Shipment Chinese
 

NFB-27(Version 2014 )(DSD / DXD )(Since 1st May 2014)
Fully Discrete  DAC+ Head amp / Preamplifier

DSD , DXD support from USB
32bit / 384K Sabre ES9018
32bit / 384K Asynchronous Transfer  USB-32 Chip
5 groups digital & 3 groups analogy inputs

OCC
wires and TCXOs built in


                  

              
Summarize Use Manual Specs Technology Detail Custom Option Shipping Cost

The unit applied analog input short design :
          The unit  had design the analog idle input short circuit ( In 6 to In 8) for avoid the disturb between different sources.
         This design also applied in a lot high end
brand devices.
          The working theory :  Without the idle input short circuit ,if the input 7 and input 8 had connect two extra DACs,  while users select the either input 7 and input 8 , the another input signal will fire through the circuits and mix  into the using signal, even though this signal is  weak  but still can degrade on the sound quality.
          With the idle input short circuit function : if user select either the input 7 and input 8, the another input signal will short circuit then no any signal fire through circuits , can keep the sound quality had not degrade.


          In USB model, start the computer then power on the NFB-27 is necessary because the NFB-27 have not applied the USB+5V for less interrupt from the computer.

How to choose the Debug switch on rear :
Before 3th. March 2015 :
         Select  the "Debug" switch on rear to setting with / without memory function .
Since 3th. March 2015:
        Select the "Debug" switch on rear to setting the RCA ,XLR and ACSS output as preamp with volume control or DAC with fixed output .
        If setting to with volume control mode, the HP/PRE select to " P", the volume can control and with the digital number display .
If setting to DAC with fixed output mode, the HP / PRE select to " P", the volume can't control, and the volume display " - - " .
        Please note : The Debug switch must change while power off .
        If your external amp had not volume control, please ensure the unit had setting to preamp with volume control mode before connect to the amp .


 

备案序号:粤ICP备05020367号

版权所有:          何庆华  睿志音响

Copyright(C) 2004   www.audio-gd.com    All Rights Reserved