Fully balanced
design, the gain stages and pre-driver stages working on
full class A , built by discrete analog stages without any OPA
and couple caps in the signal channels.
The output transistors stages working on high idle current state
. The Diamond Cross output stage design can avoid "switch
distortion" as good as the class A amp .
Diamond Difference design , detail but a bit smooth
Analog inputs: XLR
/RCA
Real balanced design, even with RCA input but can output real balance
signal without extra RCA to XLR conversion circuits
Applies 24 pieces of Toshiba 15A transistors for the output
stages. Supports 250W X2
(8 Ohms) output.
The capacitance of the whole machine reaches as high as 130,000 uF, Two
750W (Total 1500W) core transformers , Separate power supplys
for the right channel and left channel.
Each channels applied a total of 6 groups PSUs power
supply for the gain stages .
Applies all audiophile grade components, including DALE resistors,
EVOX caps, custom order NOVER (UK brand) caps, Neutrik XLR input , CMC output sockets and gold IEC socket.
|