Wisdom in mind,   enthusiasm at heart.

Home Products Warranty Shop Contact Us Shipment Chinese


 

NFB-27.77   
(Dual ES9038Pro + FPGA Processor)

Discrete  DAC + Headphone amplifier / Preamplifier
Built in FPGA processor , reject the jitter
DSD , DXD support from USB &I2S
Dual 32bit / 768K Sabre ES9038Pro
32bit / 384K Asynchronous Transfer Amanero Combo 384

Built in OCC and TCXO ,no upgrade options
9000mW at 40 ohm (Class A, per channels )

         

    

     
Summarize Use Manual Specs Custom Option Shipping Cost


The unit applied analog input short design :
          The unit  had design the analog idle input short circuit (  In 7 to In 9) for avoid the disturb between different sources.
         This design also applied in a lot high end
brand devices.
          The working theory :  Without the idle input short circuit ,if the input 7 and input 8 had connect two extra DACs,  while users select the either input 7 and input 8 , the another input signal will fire through the circuits and mix  into the using signal, even though this signal is  weak  but still can degrade on the sound quality.
          With the idle input short circuit function : if user select either the input 7 and input 8, the another input signal will short circuit then no any signal fire through circuits , can keep the sound quality had not degrade.
          If you don't want the input short functions, please custom order.
 

Functions :
HP/PRE : For select the unit output from headphone sockets or the XLR / RCA sockets.

Selector : For select the unit input channels.
1: RCA input.
2: BNC input. 
3: RCA input.
4:Optical input.
5:I2S input.
6,  USB input.
7,  Analog XLR input.
8,  Analog RCA input.
9,  Analog RCA input.

Volume: For change the volume of the unit.
DAC/PRE button: For select the unit as DAC output With volume control or Fixed level , without volume control output from the XLR / RCA sockets on rear .


The display auto dark : 
Push into the jumper is auto dark .Please operate the button while the unit power off .


DSD / PCM support from I2S input :
The DSD/PCM support not only from the USB input, but the I2S input.   The DACcan detect the I2S input signal, if input DSD signal, it will auto to remove the DSD pop noise while select the DSD track .
 


Click to review : RJ45 and HDMI pin definitions
 



Digital filter setting:

 
IIR_0 与IIR_1:For DSD.
  IIR0 IIR1
47K Push Into Push Into
50K Pull Off Pull Off
60K Pull Off Push Into
70K Push Into Pull Off
FIR_0,FIR_1,FIR_2: For PCM.
   FIR_0  FIR_1 FIR_2
Fast roll-off,  Linear: Push Into Push Into  Push Into
Slow roll-off, Linear: Push Into Push Into Pull Off
Fast roll-off, Minimum: Push Into Pull Off Push Into
Slow roll-off, Minimum: Push Into Pull Off Pull Off
Fast roll-off, Apodizing: Pull Off Push Into Push Into
Fast roll-off, Hybrid: Pull Off Pull Off Push Into
Brickwall filter: Pull Off Pull Off Pull Off


 

备案序号:粤ICP备05020367号

版权所有:          何庆华  睿志音响

Copyright(C) 2004   www.audio-gd.com    All Rights Reserved